이 제품은 더 이상 제공되지 않습니다.
구모델 / 신모델 섹션에서 신모델을 확인하거나 Endress+Hauser로 문의하시기 바랍니다.
"Product Phased Out".
For mechanical tank gauges
LT and LTC series.
-
신제품
FLEX 선택 기술적 우수성 단순성 - F
- L
- E
- X
Fundamental 선택
기본적인 측정 요구사항 충족
기술적 우수성 단순성 - F
- L
- E
- X
Lean 선택
핵심 프로세스를 손쉽게 처리
기술적 우수성 단순성 - F
- L
- E
- X
Extended 선택
혁신적인 기술로 프로세스 최적화
기술적 우수성 단순성 - F
- L
- E
- X
Xpert 선택
가장 까다로운 어플리케이션 요구사항 충족
기술적 우수성 단순성 구성에 따라 다름
-
-
기술 정보(TI)
Analog Transmitter AT500 - Technical Information
AT500 analog transmitter is used in combination with the
LT11/12/14/16 float tank gauge.
When the float tank gauge indicator reaches the alarm setting point,
AT500 transmitter outputs an alarm contact signal by operating a micro
switch.
AT500 is a limit contact unit that has six contacts for controlling the
level
of the tank contents.
The flame proof enclosure allows installation in hazardous areas, such
as in the petrochemical industry.EN KO 03/06/201301/12/2010언어:
영어
버전:
03/06/2013
파일 크기:
676.8 KB
파일 이름:
TI00032G08EN14.13.pdf
-
-
-
기술 정보(TI)
AT5000-Technical Information
Tank Gauging
언어:
영어
버전:
01/10/2006
파일 크기:
103.3 KB
파일 이름:
TI032N08en10.06.pdf
-
-
-
사용 설명서(BA)
Analog Transmitter AT5000 AT500 - Operating Instructions
AT500 analog transmitter is used in combination with LT11/12/14/16 float
tank gauge.
When the level gauge indicator reaches alarmsetting point, AT500
transmitter outputs an alarm contact signal by operating a micro switch.
AT500 is a limit contact unit that has six contacts for controlling the
level
of the tank contentsEN KO 03/06/201301/12/2010언어:
영어
버전:
03/06/2013
파일 크기:
1.3 MB
파일 이름:
BA01012G08EN14.13.pdf
-