Measuring technology for sustainable power network expansion
Solutions for ecological groundwater management
The energy transformation needs high-performance networks: The A-Nord high-voltage direct current power line brings wind energy from the North Sea to the consumption centers. Hölscher Wasserbau uses professional groundwater management to ensure that cables are routed safely and the environment is protected – with support from state-of-the-art measuring technology from Endress+Hauser.
Collaboration between Hölscher Wasserbau and Endress+Hauser.
The electromagnetic flowmeter Promag W 800 measures the quantity of groundwater.
The result
-
Legally compliant documentation of the water quantities
-
Protection of ground, vegetation and bodies of water
-
Autonomous operation without an external power supply
-
Long service life, even under adverse conditions
"Water neutrality can only be achieved if we know exactly how much water we extract, treat, and return. Precise measuring technology creates the necessary transparency for this."
Hölscher Wasserbau GmbH
The customer requirement
During construction of the A-Nord power line, Hölscher Wasserbau has to move large quantities of groundwater – and strictly adhere to environmental regulations in the process. The German Regulation on the Protection of Surface Waters (OGewV) demands careful treatment and seamless documentation of the water quantities to avoid dried out ground or damage to bodies of water and vegetation. Remote discharge points without power supply make it difficult to use conventional measuring technology.
Our solution
Hölscher Wasserbau installed 34 devices from Endress+Hauser to continuously collect data on extraction, treatment, and reintroduction of groundwater along the project section. Promag W 800 documents every liter for compliance with ecological standards. The battery-powered device operates autonomously for up to 15 years – even under adverse conditions. Mobile access and configuration of the measured values makes it easier to handle on-site and ensures continuous measurements without interruption.
Devices used
Proline Promag W 800: electromagnetic flowmeter for precise measurement and documentation of the groundwater quantities
Proline Promag W 10: measurement of the flow rate in iron removal systems
Cerabar PMC21: pressure transmitter for monitoring pumping and filtering processes
관련 제품
| FLEX 선택 | 기술적 우수성 | 단순성 |
|---|---|---|
Fundamental 선택 기본적인 측정 요구사항 충족 |
기술적 우수성
|
단순성
|
Lean 선택 핵심 프로세스를 손쉽게 처리 |
기술적 우수성
|
단순성
|
Extended 선택 혁신적인 기술로 프로세스 최적화 |
기술적 우수성
|
단순성
|
Xpert 선택 가장 까다로운 어플리케이션 요구사항 충족 |
기술적 우수성
|
단순성
구성에 따라 다름 |
