Analog disinfection sensor
CCS240
Standard sensor for industrial and pool water treatment
-
©Endress+Hauser
CCS240 is the analog sensor for standard measurement of chlorine dioxide. It delivers reliable values even if fluctuations in flow or conductivity occur and allows control of the disinfection loop so that the water is free of germs. At the same time, the sensor is designed for long calibration and service intervals reducing your maintenance effort.
장점
Recalibration intervals approx. 1 to 4 months under constant operating conditions
Easy membrane replacement thanks to prefabricated membrane cap
Measured values are not affected by conductivity fluctuation
Measurement virtually independent of flow rate in the range above 30 l/h
Zero-point calibration not required. No complex installation of an activated carbon filter, as found with open chlorine sensors.
적용 분야
CCS240 measures chlorine dioxide in:
Drinking water
- Monitoring, control and optimization of disinfection processesIndustrial process water
- Process applications, e.g. bottle rinsing machinesUtilities of all industries
- All disinfection measuring points
