Title
button cancel
키워드, 주문 또는 제품 코드 또는 일련 번호를 검색해 보십시오(예: “CM442” 또는 “기술 정보”).
검색하려면 최소 2자 이상 입력하십시오.
제품 사진: SS2100i-1 단일 외함 IECEx, ATEX Zone 1 TDLAS 가스 분석기, 정면 보기

SS2100i 가스 분석기

미량 가스 성분 측정에서 매우 높은 신뢰성을 제공

SS2100I
가격 로드 중
일시적으로 가격을 로드할 수 없습니다.
Price on request
가격 활성화 중
가격: 정보 제공
측정/작업 필터링
측정/작업 필터링
측정값

이 제품의 CAD 도면을 다운로드하도록 설정

닫기 개의 검색 결과 보기

  • 측정 원리

    TDLAS

  • Product headline

    An advanced gas analyzer for hydrogen sulfide (H2S) measurement. The SS2100i uses tunable diode laser absorption spectroscopy (TDLAS) to determine the concentration of the analyte without coming into physical contact with the stream.

  • Channels

    1

  • Analyte and measurement ranges

    H2S (Hydrogen Sulfide):
    0 to 10 ppmv
    0 to 1000 ppmv
    0 to 5000 ppmv
    0 to 5% volume

  • Measured variables

    Concentration
    Cell Pressure
    Cell Temperature

  • Ambient temperature range

    -20 to 50°C (-4 to 122°F)
    Optional (i-2 only): -10 to 60°C (14 to 140°F)

  • Operating pressure range

    Inlet Pressure: 140 to 350 kPa (20 to 50 psig)
    Sample Cell: 800 to 1200 mbara or 950 to 1700 mbara (optional)

  • Analyzer wetted materials

    316L stainless steel
    FKM O-Rings
    Glass

  • Power supply

    120 or 240 VAC ± 10 %, 50 to 60 Hz; 300W

  • Communication

    Analog Output: Two 4-20mA Isolated, 1200 ohms at 24 VDC max load (measurement value)
    Analog Input: One 4-20mA Isolated, 1200 ohms at 24 VDC max load (process pressure)
    Serial: RS232C and Ethernet
    Protocol: Modbus Gould RTU or Daniel RTU or ASCII
    Digital Outputs: 5, Concentration Alarm, General Fault, Validation Fail, Validation 1 Active, Validation 2 Active
    Digital Inputs: 2, Flow Alarm, Validation Request

  • Housing materials

    Electronics: Copper-free Aluminum
    Laser/Cell Enclosure: Copper-free Aluminum (i-2 only)
    Sample System Enclosure: 304 or 316 stainless steel

  • Hazardous area approvals

    IECEx / ATEX / CNEx / KCs / CCOE / JPNEx Zone 1

  • Degree of protection

    IP66

  • Product safety

    CE

  • Metrological approvals

    PAC China, Kazakhstan (i-1 only)

  • 측정 원리

    TDLAS

  • Product headline

    An advanced gas analyzer for moisture (H2O) measurement. The SS2100i uses tunable diode laser absorption spectroscopy (TDLAS) to determine the concentration of the analyte without coming into physical contact with the stream.

  • Channels

    1

  • Analyte and measurement ranges

    H2O (Moisture):
    0 to 10 ppmv
    0 to 100 ppmv
    0 to 50 ppmv
    0 to 5000 ppmv

  • Measured variables

    Concentration
    Moisture Dew Point
    Cell Pressure
    Cell Temperature

  • Ambient temperature range

    -20 to 50°C (-4 to 122°F)
    Optional (i-2 only): -10 to 60°C (14 to 140°F)

  • Operating pressure range

    Inlet Pressure: 140 to 350 kPa (20 to 50 psig)
    Sample Cell: 800 to 1200 mbara or 950 to 1700 mbara (optional)

  • Analyzer wetted materials

    316L stainless steel
    FKM O-Rings
    Glass

  • Power supply

    120 or 240 VAC ± 10 %, 50 to 60 Hz; 300W

  • Communication

    Analog Output: Two 4-20mA Isolated, 1200 ohms at 24 VDC max load (measurement value)
    Analog Input: One 4-20mA Isolated, 1200 ohms at 24 VDC max load (process pressure)
    Serial: RS232C and Ethernet
    Protocol: Modbus Gould RTU or Daniel RTU or ASCII
    Digital Outputs: 5, Concentration Alarm, General Fault, Validation Fail, Validation 1 Active, Validation 2 Active
    Digital Inputs: 2, Flow Alarm, Validation Request

  • Housing materials

    Electronics: Copper-free Aluminum
    Laser/Cell Enclosure: Copper-free Aluminum (i-2 only)
    Sample System Enclosure: 304 or 316 stainless steel

  • Hazardous area approvals

    IECEx / ATEX / CNEx / KCs / CCOE / JPNEx Zone 1

  • Degree of protection

    IP66

  • Product safety

    CE

  • Metrological approvals

    PAC China, Kazakhstan (i-1 only)

  • 측정 원리

    TDLAS

  • Product headline

    An advanced gas analyzer for carbon dioxide (CO2) measurement. The SS2100i uses tunable diode laser absorption spectroscopy (TDLAS) to determine the concentration of the analyte without coming into physical contact with the stream.

  • Channels

    1

  • Analyte and measurement ranges

    CO2 (Carbon Dioxide):
    0 to 10 ppmv
    0 to 1000 ppmv
    0 to 5000 ppmv
    0 to 5% volume
    0 to 10% volume
    0 to 20% volume

  • Measured variables

    Concentration
    Cell Pressure
    Cell Temperature

  • Ambient temperature range

    -20 to 50°C (-4 to 122°F)
    Optional (i-2 only): -10 to 60°C (14 to 140°F)

  • Operating pressure range

    Inlet Pressure: 140 to 350 kPa (20 to 50 psig)
    Sample Cell: 800 to 1200 mbara or 950 to 1700 mbara (optional)

  • Analyzer wetted materials

    316L stainless steel
    FKM O-Rings
    Glass

  • Power supply

    120 or 240 VAC ± 10 %, 50 to 60 Hz; 300W

  • Communication

    Analog Output: Two 4-20mA Isolated, 1200 ohms at 24 VDC max load (measurement value)
    Analog Input: One 4-20mA Isolated, 1200 ohms at 24 VDC max load (process pressure)
    Serial: RS232C and Ethernet
    Protocol: Modbus Gould RTU or Daniel RTU or ASCII
    Digital Outputs: 5, Concentration Alarm, General Fault, Validation Fail, Validation 1 Active, Validation 2 Active
    Digital Inputs: 2, Flow Alarm, Validation Request

  • Housing materials

    Electronics: Copper-free Aluminum
    Laser/Cell Enclosure: Copper-free Aluminum (i-2 only)
    Sample System Enclosure: 304 or 316 stainless steel

  • Hazardous area approvals

    IECEx / ATEX / CNEx / KCs / CCOE / JPNEx Zone 1

  • Degree of protection

    IP66

  • Product safety

    CE

  • Metrological approvals

    PAC China, Kazakhstan (i-1 only)

제품 비교

여러분의 개인 정보는 소중합니다

당사는 쿠키를 사용해 사용자의 브라우징 경험을 개선하고, 통계를 수집하여 사이트 기능을 최적화하고, 맞춤형 광고 또는 콘텐츠를 제공합니다.

"모두 허용"을 선택하면 쿠키 사용에 동의하는 것으로 간주됩니다.
자세한 내용은 쿠키 정책 을 참조하시기 바랍니다.