Turbimax CUS31
이 제품은 더 이상 제공되지 않습니다.
구모델 / 신모델 섹션에서 신모델을 확인하거나 Endress+Hauser로 문의하시기 바랍니다.
문서 / 매뉴얼 / 소프트웨어
-
Technical Information Turbimax W CUS31
Installation and immersion sensor for drinking water and industrial water according to the 90° scattered light method
Technical Information (TI) -
Technical Information CUM 223/
Turbidity and suspended solids transmitter
Technical Information (TI) -
Operating Instructions Liquisys M CUM 223/253
Transmitter for Turbidity and Solids Content
Operating Instruction (BA) -
Operating Instructions TurbiMax W CUS31
Turbidity sensor
Operating Instruction (BA) -
Service procedures CUS31 / CUS31 W
Special Documentation Service procedures CUS31 / CUS31 W
Special Documentation (SD) -
New control and management system with a touch panel for the complete
water supply
The municipality of Hasliberg is located in the canton of Bern, approx. 1,100 m above sea level. The drinking water supplied to roughly 1,400 inhabitants derives exclusively from springs. The local administrative area of Hasliberg begins behind the Brünigpassand reaches its highest point at 2,534 m above sea level. The main consumers of the municipality are tourists. As a result, theirnumber fluctuates heavily depending on the
Case Studies (CS)10/07영어 -
Kompaktsystem, Liquisys Turbidity, Sensor, StamoSens, TurbiMax W
Product Code: CUC101-, CUM223-, CUM253-, CUM740-, CUS31-, CUS41-, CUS65- Region/Country: Russia (GOST) Approval Agency: Rosstandart Approval Number: DE.C.31.004.A_39880
Metrology러시아어
액세서리 / 예비 부품
-
-
Order code 50013733
-
Order code 50051753
o-ring f.CLS21 ID28.17 W3.53
-
Order code 50057944
Calibration vessel for CUS31 and CUS41
With device for sensor positioning Material: PVC, black.
-
Order code 50072656
Spare parts kit CUY 2
for connection of turbidity flow assemblies to tubes (i.e. CUD3/CUS31 or CUA250).
-
Order code 50089252
Kit CUY31 Wiper Blade
3 replacement wipers for CUS 31/CUS 41 Material: SS/NBS/NBR/PVC
-
Order code 51500733
Flow assembly "S" for CUS31/CUS52D
additional item Adapter for S-assembly (51503244) is required
-
Order code 51500735
Flow assembly "E" for CUS31
for upgrage of sensorversion CUS31-xxA and for CUS41, CUS51D, CUS52D additional item Adapter for S-assembly (51503244) is required
-
Order code 51500832
Junction box RM
to lengthen the cable for Memosens/CUS31/41. Protection class IP 65, with 2x PG 13.5
-
Order code 51502543
Measuring cable CYK81
To lengthen the fixed cable of CUS sensors e.g. CUS31/CUS41/Memosens. 2x2 wires, twisted pair with shield and TPE-O-sheath (2x2x0,5 qmm + sheath). Minimum length 10 m (price per meter).
-
Order code 51503473
O-ring ID 40.00 W 3.00 AD 46.00 EPDM
-
Order code 51504477
-
Order code 51511635
Pipe clamp DN100 for S/E-assembly
-
Order code 71023415
Kit CUS31/52D: Flow-headpart S-assembly
-
Order code 71371596
Kit 31 with wiper 15 m cable
-
Order code 71371599
Kit 31 without wiper 15 m cable
-
Order code 71390541
Kit CUS31/41: Adapter for S/E assembly
-
-
기존 제품
-
신제품
