키워드, 주문 또는 제품 코드 또는 일련 번호를 검색해 보십시오(예: “CM442” 또는 “기술 정보”).
검색하려면 최소 2자 이상 입력하십시오.
Bundle of CM72 transmitter and RIA46 field meter

1-/2-channel transmitter bundle with 4-wire field meter

RIA46 field meter and up to two Liquiline Compact CM72 transmitters for field installation in all industries

71537838
Please Wait (spinning wheel)
가격 로드 중
일시적으로 가격을 로드할 수 없습니다.
Price on request
가격 활성화 중
가격: 정보 제공
장바구니 설정 후 가격

1 채널 트랜스미터
Liquiline Compact CM72

Liquiline Compact CM72는 소형 Memosens 센서용 트랜스미터입니다. 설치 공간이 제한적이고 멀티파라미터 계기의 유연성이 필요하지 않은 경우에 최상의 선택입니다. 센서와 함께 대부분의 어셈블리에 손쉽게 설치할 수 있고, 주문 과정에서 측정 파라미터와 측정 범위가 이미 지정되기 때문에 작동 오류를 최소화하면서 즉시 CM72를 사용할 수 있습니다.

Filter specifications
Measuring / Application task
  • 측정 원리

    Potentiometric

  • Application

    All sectors, supporting all sensors with the blue Memosens plug-in head, enviromental sector

  • Installation

    Connection of digital sensors with Memosens-Protocol

  • Characteristic

    Liquiline CM72 is a fixed configured two-wire transmitter for all areas of process engineering

  • Measuring range

    pH Sensor: 0 to 14 pH

  • Design

    Peek housing

  • Material

    Housing, cover: Peek 151
    Strain relief: EPDM
    Axial ring: Peek 450 G

  • Dimension

    Diameter: 18.95 mm (0.75 inch)
    Length: 114.7 mm (4.52 inch)

  • Connection

    Connection of digital sensors with Memosens-Protocol

  • Ingress protection

    IP67, IP68, NEMA Type 6

  • Input

    One channel transmitter

  • Output / communication

    4 to 20 mA

  • Certificates, declarations and approvals

    CE, CSA C/US GP

  • 측정 원리

    Potentiometric

  • Application

    All sectors, supporting all sensors with the blue Memosens plug-in head, enviromental sector

  • Installation

    Connection of digital sensors with Memosens-Protocol

  • Characteristic

    Liquiline CM72 is a fixed configured two-wire transmitter for all areas of process engineering

  • Measuring range

    ORP sensors: -1500 mV to 1500 mV

  • Design

    Peek housing

  • Material

    Housing, cover: Peek 151
    Strain relief: EPDM
    Axial ring: Peek 450 G

  • Dimension

    Diameter: 18.95 mm (0.75 inch)
    Length: 114.7 mm (4.52 inch)

  • Connection

    Connection of digital sensors with Memosens-Protocol

  • Ingress protection

    IP67, IP68, NEMA Type 6

  • Input

    One channel transmitter

  • Output / communication

    4 to 20 mA

  • 측정 원리

    Potentiometric

  • Application

    All sectors, supporting all sensors with the blue Memosens plug-in head, enviromental sector

  • Installation

    Connection of digital sensors with Memosens-Protocol

  • Characteristic

    Liquiline CM72 is a fixed configured two-wire transmitter for all areas of process engineering

  • Measuring range

    Conductivity sensors: 0 to 500 mS/cm

  • Design

    Peek housing

  • Material

    Housing, cover: Peek 151
    Strain relief: EPDM
    Axial ring: Peek 450 G

  • Dimension

    Diameter: 18.95 mm (0.75 inch)
    Length: 114.7 mm (4.52 inch)

  • Connection

    Connection of digital sensors with Memosens-Protocol

  • Ingress protection

    IP67, IP68, NEMA Type 6

  • Input

    One channel transmitter

  • Output / communication

    4 to 20 mA

  • 측정 원리

    Potentiometric

  • Application

    All sectors, supporting all sensors with the blue Memosens plug-in head, enviromental sector

  • Installation

    Connection of digital sensors with Memosens-Protocol

  • Characteristic

    Liquiline CM72 is a fixed configured two-wire transmitter for all areas of process engineering

  • Measuring range

    Oxygen sensors: 0 to 20 mg/l

  • Design

    Peek housing

  • Material

    Housing, cover: Peek 151
    Strain relief: EPDM
    Axial ring: Peek 450 G

  • Dimension

    Diameter: 18.95 mm (0.75 inch)
    Length: 114.7 mm (4.52 inch)

  • Connection

    Connection of digital sensors with Memosens-Protocol

  • Input

    One channel transmitter

  • Output / communication

    4 to 20 mA

RIA46 process indicator with control unit

Analog measured values are indicated, evaluated and calculated by the field indicator. With the integrated loop power supply two-wire sensors can be powered. The universal inputs enable the connection of current, voltage, RTDs and TCs. Limit values can be monitored and relays can be switched. Via analog outputs process signals can be forwarded. The integrated application package "differential pressure" allows the quick and easy commissioning for differential pressure applications.

Filter specifications
Measuring / Application task
  • 측정 원리

    Indicators with control unit

  • Measuring principle

    Field meter with control unit

  • Function

    Display
    Loop Power Supply
    Transmitter Functionality
    Barrier
    Signal Isolation
    Calculation
    Limit Alarm

  • Display

    Multicolor backlight LCD
    White/black/yellow
    Bargraph
    Unit
    TAG
    Alarm warning in plain text

  • Power Supply

    20...250V AC/DC

  • Input

    2 x universal (U, I, R, RTD, TC)

  • Output

    2 x analogue output (I, U) 1 x loop power supply

  • Software functions

    Linearization
    Minimum value per channel
    Maximum value per channel
    Calculation
    Band value monitoring

  • Certificates

    ATEX [Ex ia]
    CSA General Purpose
    CSA AIS, NI
    FM AIS, NI
    UK [Ex ia Ga] IIC, [Ex ia Da]

  • SIL

    2

  • Panel mounting

    field