Field Xpert SMT50B

Device configurator

The Field Xpert SMT tablet for universal device configuration supports a variety of protocols, the Endress+Hauser service protocols, and connection to Endress+Hauser Bluetooth field devices and Endress+Hauser WLAN field devices. You can connect the field devices directly via a suitable interface, such as a modem (point-to-point), a bus system (point-to-bus) or a wireless connection (WLAN/Bluetooth).

Front camera:
1080p at 30 fps 8M RGB camera + 480p at 30 fps IR camera
Rear camera:
1080p at 30 fps 11M RGB camera

Intel Core Ultra 5 236V vPro Enterprise

16 GB, LPDDR5x

512 GB, SSD, TLC
1 microSD-card slot

2-cell, 18 Wh, Lithium Ion Polymer, ExpressCharge™

262.5 mm x 188 mm x 25.4 mm (10.34 in x 7.4 in x 1.0 in)

25.6cm (10.1”) 1000 Nit Outdoor-Readable, sRGB 100%, Water/Glove-Capable Touchscreen, Anti-Glare, Corning® Gorilla® Glass 5, Active Pen Support, Passive Pen Support

16:10 FHD+ (1920 x 1200) @ 60 Hz

2 USB 3.2 Gen 2 (10 Gbps) Type-C® ports with DisplayPort™ Alt Mode/USB4/Power Delivery
1 USB 3.2 Gen 1 (5 Gbps) port with PowerShare
1 RJ45 Ethernet port
Wireless Intel® Wi-Fi 7 BE201, 2x2, 802.11be, Bluetooth® 5.4 wireless card
Optional:
Mobile broadband
5G Qualcomm® Snapdragon™ X72 Global 5G Modem (DW5934e), eSIM
GPS
Airoha GNSS L1 (1575.42 MHz)

Operation system:
Windows 11 IoT Enterprise 2024 LTSC

Touch-enabled device configuration software optimized for Field Xpert. The software supports protocols such as HART, PROFIBUS DP/PA, PROFINET, FOUNDATION Fieldbus, Modbus, IO-Link, and Endress+Hauser service protocols (CDI, ISS, IPC and PCP) and includes several thousand pre-installed device and communication drivers.

Degree of protection:
IP66
Electromagnetic Compatibility:
MIL-STD-461G
Vibration resistance:
MIL-STD-810H
Impact resistance:
MIL-STD-810H