Modular thermometer with RTD or TC insert
Designed for use in the Oil & Gas industry. For installation in already existing thermowells
The modular and robust thermometer finds its use in applications for the Oil & Gas industry but also in almost all industries. An optional head transmitter, with all common communication protocols, makes the device ready to use with enhanced measurement accuracy and reliability compared to directly wired sensors. The thermometer can be ordered either with resistance (RTD) or with thermocouple (TC) insert.
High degree of flexibility thanks to modular design with standard terminal heads as per DIN EN 50446 and customer-specific immersion lengths
Types of protection for use in hazardous locations: Intrinsic Safety (Ex ia)
Designed for use in the Oil & Gas industry with universal range of application:
Suitable for installation in already existing thermowells
Measuring range: Resistance insert (RTD) –50 to +500 °C (–58 to +932 °F), thermocouple (TC): –40 to +1 100 °C (–40...
문서 / 매뉴얼 / 소프트웨어
액세서리 / 예비 부품
Order code 71367427
Spare parts kit ring D21/di 10xgreen,10p
Packing unit: 10 pieces
Order code 71389488
Extension cable TC IEC 2x type K, 3 pcs.
L=180mm, 3 pieces
Order code TPC100-
Replaceable insert (MgO)
Order code TS111-
Insert iTHERM TS111
Replaceable. Metric version according DIN43735.
Order code TN15-
Extension neck for thermowell TN15
Neck tube made from welded parts, with thread connection to a terminal head form DIN B and different connections to a separate thermowell.
Nr B Order code TMT82-
iTEMP TMT82, Transmitter HART
2-wire temperature transmitter. Dual universal sensor input. Galvanic isolation 2kV (input/output). Application: RTD, TC, Ohm and mV. ::Highly reliable due to drift detection and sensor back up. ::Optional also for safety critical applications by means of SIL 2/3 acc. to IEC61508.
Order code TMT84-
iTEMP TMT84, Transmitter PA
Dual sensor input. Advanced diagnostics:sensor monitoring. PROFIBUS PA Profile 3.02. Galvanic isolation 2kV. Application: RTD, TC, Ohm, mV. Current consumption: 11 mA. Mounting: head form B, DIN EN50446. Factory setup: CH1: Pt100, 3-wire, oC. CH2: inactive. Differing configuration optional selectable.
Order code TMT85-
iTEMP TMT85, Transmitter FF
Dual sensor input. Advanced diagnostics: sensor monitoring. FOUNDATION Fieldbus protocol Galvanic isolation 2 kV. Application: RTC, TC, Ohm, mV. Current consumption: 11 mA. Mounting: head form B, DIN EN50446. Factory setup: CH1: Pt100, 3-wire, oC. CH2: inactive. Differing configuration optional selectable.
Order code TMT182-
iTEMP TMT182, Head Transmitter HART
Temperature transmitter, Protocol HART. Application: RTD, TC, Ohm, mV. 2-wire 4-20mA, galvanicisolation. Fault reaction: NAMUR NE 43. Mounting: head form B, DIN EN50446. UL listed.